1.Thickness measurement The precise thickness of each layer of a tube is fundamental to its performance. This test uses a micrometer or specialized thickness gauge to measure the actual thickness of each layer (from the inner barrier film to the outer printed layer), typically at five to ten points throughout the tube. The goal is to ensure compliance with design specifications. 2.Sealing performance test Heat Seal Strength (Tube End): Cosmetic Plastic Cream Tube ends are sealed using heat during the manufacturing process. This test measures the force required to tear the seal. It ensures that the seal will not crack during extrusion, transportation, and storage. Standards generally require a minimum strength to ensure reliability. Torque Test (Tube End to Cap): This test evaluates the tightness of the connection between the tube end and the cap. A torque meter measures the force required to unscrew or tighten the cap, ensuring it is neither too loose nor too tight....

Cleaning cosmetic glass dropper bottles properly is key to keeping your serums, essential oils, and liquids free from contamination. Follow this quick 4-step process to ensure they’re spotless and safe for reuse.​ First, disassemble the glass dropper bottle—separate the rubber bulb, glass pipette, and bottle itself. Fill a bowl with warm (not hot) water and let all parts soak for 10–15 minutes. This loosens residue, oils, or dried liquids clinging to the surfaces, making them easier to clean.​ Next, disinfect with rubbing alcohol (70% isopropyl works best). Either submerge all components in alcohol for 5 minutes, or pour alcohol into the bottle and squeeze the bulb repeatedly to flush the tube thoroughly. Alcohol effectively kills bacteria and breaks down tough, stubborn grime that plain water would likely leave behind.​ After alcohol treatment, rinse all components with warm water to remove any alcohol residue. Then, air-dry them completely on a clean towel—lay...