From surface smoothness to pump head compatibility, we control quality across two dimensions. I. Appearance Quality Surface Smoothness: glass bottle bodies must be free of scratches, bubbles, pinholes, uneven shrinkage, and other defects. Even minute surface bubbles may harbor dirt or foster bacterial growth (posing significant risks for skincare and food products). We ensure uniform surface smoothness through a combination of visual inspection under natural light and tactile verification. Color Consistency: Colors must closely match the color swatch or Pantone number confirmed by the customer, with no visually discernible color variation permitted within the same batch. This requires suppliers to possess advanced color matching systems and stable masterbatch addition processes. Printing Durability: For screen printing, foil stamping, labeling, etc. Inspection should focus on print clarity, with particular emphasis on testing print adhesion and wear resistance. Common tests include the...

Glass bottles are subject to various external forces during transportation, stacking, and daily use. We conduct mechanical tests that simulate actual scenarios to prevent product failures during end-use. Leakage test: Use a negative pressure seal tester to place the bottle under a specific vacuum degree to observe whether there is leakage or bubble generation to ensure that the contents will not leak or be contaminated. Drop test: This test simulates an accidental drop that may occur during transportation and handling. A bottle filled with contents (or a substitute) should not break or leak after being dropped from a specified height (such as 1 meter or 1.5 meters) onto a hard surface. Stacking Test: To simulate warehouse stacking conditions, we apply a 5 kg weight (or the equivalent of 10 layers of bottles) to a stack of filled bottles for 72 hours. The bottles must show no deformation, collapse, or seal damage. Bottle Cap Torque Test: A torque meter is used to measure the force requi...